Trish In Cyberspace gravatar image

Ebola: How can free residual chlorine of 0.05% or 0.5% be measured please? A standard Pooltester only measures a few ppmase

by Trish In Cyberspace | 2015-04-27 16:54:51 -0500

Is there any colorimeter or comparator for testing free residual chlorine to ensure that the levels in the handwashing and cleaning solutions in triage and holding facilities are the right level, please? A standard Pooltester can only measure in the low range of a few ppm, so that's not helpful except for drinking water.

edit retag flag offensive close merge delete

11 answers

Sort by ┬╗ oldest newest most voted
Cyril Cadier gravatar image

by Cyril Cadier | RedR Experts | 2015-05-02 04:09:48 -0500

liked by
2
Like including you Undo Like

Hi Trish As Robert suggest, the WataTest works well to check chlorine solutions in Ebola context. It has been designed to test a 0,6% solution, so it works for 0,5%. To test 0,05% you just test a 10 time bigger sample. I've tried it myself, it works. Advantages : Antenna technology is already present in Guinea, Liberia and Sierra Leone, and the WataTest is relatively cheap and produced locally.

edit flag offensive delete link more

Comments

Wonderful news Cyril!!! Do you have their contact details in Sierra Leone please?

Trish In Cyberspace ( 2015-05-02 04:17:55 -0500 )edit

Thanks @Trish In Cyberspace. How to obtain a Watatest kit in Sierra Leone for checking chlorine solutions is now a separate question here: http://ebola.knowledgepoint.org/en/qu...

Knowledgepoint Admin ( 2015-05-13 09:35:04 -0500 )edit
aidos.nando gravatar image

by aidos.nando | 2015-05-01 04:31:25 -0500

liked by
1
Like including you Undo Like

Hi Trish,

I am not sure for what purpose you are trying to measure chlorine levels, but I hope this helps... some...

http://www.who.int/water_sanitation_h...

http://waterquality.cce.cornell.edu/p...

edit flag offensive delete link more
Robert Hodgson gravatar image

by Robert Hodgson | RedR Experts | 2015-05-01 04:18:10 -0500

liked by
1
Like including you Undo Like

Antenna in Switzerland make a test kit that can test concentrated chlorine solutions in the range needed for ebola treatment centres. see http://www.antenna.ch/en/research/saf.... My experience is that you can dilute as previously described but it's a bit hit and miss. Better than nothing if you are not sure of your HTH supplies.

edit flag offensive delete link more
Daniele Lantagne gravatar image

by Daniele Lantagne | Ebola WASH TG | 2015-05-05 09:27:58 -0500

liked by
0
Like including you Undo Like

Attached please find a link to a fact sheet written on the topic with some recommended test methods.

Thank you, Peace, Daniele

http://wash-liberia.org/wp-content/bl...

edit flag offensive delete link more
hmarangu gravatar image

by hmarangu | 2015-05-05 00:28:23 -0500

liked by
0
Like including you Undo Like

Guess this is not easy in some contexts. But it can be done by titration.

Alternatively use a BDH comparator. It has a dulling screen to read up to 4mg/li

edit flag offensive delete link more
Steve Oxtoby gravatar image

by Steve Oxtoby | RedR Experts | 2015-05-03 18:10:09 -0500

liked by
0
Like including you Undo Like

There are test strips for doing this usually used for testing pipe disinfection residuals so with a high range. Not massive accuracy but OK for checking the basic level. Lamotte is one US make http://www.lamotte.com/en/blog/test-f...

edit flag offensive delete link more
Trish In Cyberspace gravatar image

by Trish In Cyberspace | 2015-05-01 15:18:21 -0500

liked by
0
Like including you Undo Like

Thanks Robert and Iain!

edit flag offensive delete link more
Trish In Cyberspace gravatar image

by Trish In Cyberspace | 2015-05-01 08:29:19 -0500

liked by
0
Like including you Undo Like

Thanks John for your answer. Both of these products are unfortunately unable to measure in the range we require, which is up to 5000 ppm.

edit flag offensive delete link more
johnf gravatar image

by johnf | 2015-05-01 08:20:28 -0500

liked by
0
Like including you Undo Like

Hi Trish,

This test strip works in the range you're asking about: http://www.sensafe.com/test-strips/se...

You might also consider a low range color disk test kit, such as this one from Hach: http://www.hach.com/free-chlorine-col...

edit flag offensive delete link more
LaurentS gravatar image

by LaurentS | 2015-05-01 03:38:17 -0500

liked by
0
Like including you Undo Like

I'm not aware of any (accessible) tester in these ranges.

You could test by diluting your solution down to the ppm range using a syringe and a litre of clean water, but the uncertainty on the end result is probably too high to bring any usable information.

My best take on it would be to double check your dosage calculations, use reasonably clean water and containers, use proper chlorine generating products (not expired), and discard the solutions after 24hrs.

The impact of microbiology/chemistry in the water would only be in the ppm range, so the impact on a 0.05% (=0.5mg/L=500ppm) will be minimal (ie: even if 1-2ppm of chlorine get used up when preparing the solution, you'll still be close enough to your target, even more so with 0.5% solutions)

edit flag offensive delete link more

Question Tools

Follow
1 follower

Stats

Asked: 2015-04-27 16:54:51 -0500

Seen: 5,525 times

Last updated: May 05 '15